A prefilled rechargeable vape system gets started by charging the battery first, attaching a sealed prefilled cartridge or pod, and drawing through the mouthpiece to activate the device. No configuration, no settings, and no technical knowledge sits between those three steps and a working device. Rechargeable Vapes from Ezee are built around this sequence. This keeps the startup process direct enough that a first-time user can complete it without referring to anything beyond the contents of the starter kit.
Starter kit contents
A starter kit for a prefilled rechargeable power pack typically contains three things. A rechargeable battery, an initial supply of prefilled cartridges or pods, and a USB charger. Everything you need is in one package. Nothing extra needs sourcing before the device can be used for the first time.
Each component in the kit has a single role. The battery powers the device. Cartridges or pods carry e-liquid. The USB charger restores battery charge when it drops. None of these components interacts with each other in any complicated way, and none of them requires setup beyond the physical connections involved in attaching and charging.
- Battery connects to the USB charger through a direct thread or port, depending on the device format.
- Prefilled cartridges or pods are sealed at manufacture and require no preparation before attachment.
- USB charger connects to any standard USB power source without needing a dedicated wall adapter.
First charge before use allows the battery to reach full capacity before any draw is attempted.
First charge process
Charging the battery before first use is the standard starting point for any rechargeable vape system. Connecting the battery to the USB charger sends current into the lithium-ion cell until the internal circuit registers a full charge. Flow stops automatically at that point without any input from the user.
Charge time varies depending on battery capacity, but most compact rechargeable vape batteries reach full charge within a relatively short period. Once charged, the battery detaches from the charger and is ready for a cartridge or pod to be attached. No settings need adjusting, and no indicators need checking beyond confirming the charge is complete before detaching.
Attaching the first cartridge
Screw-thread cartridge formats attach by rotating the cartridge onto the battery terminal in a clockwise direction until it sits securely against the battery body. Pod formats slide or click into the pod slot, with magnetic versions pulling the pod into the correct position automatically during insertion.
Neither attachment process involves touching e-liquid or opening any sealed component. Cartridges and pods are designed to be handled from the outside only, with all liquid and heating components fully enclosed within the sealed casing. Attachment takes a few seconds and completes the setup process entirely.
Drawing on the mouthpiece after attachment activates the device immediately. No power-on sequence, no button press, and no warm-up period sit between attaching the cartridge and using the device. Sensor detects airflow, battery delivers current, coil heats, and vapour arrives at the mouthpiece. First use works the same as every subsequent use because nothing about the startup process changes once the battery is charged and the cartridge is attached.
